extruder Directory Reference

Files
file	analog.c
	Analog subsystem.
file	analog.h [code]
file	extruder/arduino.h [code]
	pin definitions and I/O macros
file	extruder/arduino_168_328p.h [code]
file	extruder/crc.c
	crc16 routine
file	extruder/crc.h [code]
file	extruder/debug.h [code]
file	extruder/delay.c
	Delay routines.
file	extruder/delay.h [code]
file	extruder.c
file	heater.c
	Manage heaters.
file	heater.h [code]
	Teacup configuration for the CNC Control Panel project.
file	extruder/intercom.c
	motherboard <-> extruder board protocol
file	extruder/intercom.h [code]
file	temp.c
	Manage temperature sensors.
file	temp.h [code]
	Teacup configuration for the CNC Control Panel project.
file	ThermistorTable.h [code]
file	extruder/timer.c
	Timer management - step pulse clock and system clock.
file	extruder/timer.h [code]
file	extruder/watchdog.c
	Watchdog - reset if main loop doesn't run for too long.
file	extruder/watchdog.h [code]